Author: Teamgee Skateboard via YouTube
Teamgee Electric Skateboard Tutorial: How to Replace Front Wheel & PU
Directions:
Use the T tool included in the package to loose the bolt
Keep the parts and remove the front wheel
Replace with a new front wheel and put the parts back on
Tighten the bolt with the T tool
Check if the wheel is tightened too much by spinning it to see if there’s any resistance
Now replace the PU on the motor
Remove the 6 screws using a hex key from the T tool
Remove the PU sleeve by pulling upwards
Keep all the screws somewhere safe for later
It is not shown but we recommend applying some lube inside the PU to protect the motor. Purchase the heat-resistant lube from below link: https://www.teamgee.com/collections/skateboard-accessories/products/heat-resistant-lube-for-motors
Now put the motor cap on
Put all 6 screws back in
Spin the wheel to see whether it’s too tight
Do the same for the other hub motor
———————————
To stay most updated please follow our social media below:
Facebook: https://www.facebook.com/teamgeeskateboard
Instagram: https://www.instagram.com/teamgeeskateboard
YouTube: https://www.youtube.com/teamgeeskateboard
Our website: https://www.teamgee.com/