Why BACKFIRE choose 12S 50.4V high voltage system as the X2 G3 system

Author: Backfire Boards via YouTube
Go to Source
Why BACKFIRE choose 12S 50.4V high voltage system as the X2 G3 system

Why BACKFIRE choose 12S 50.4V high voltage system as the next general-purpose system

When energy is conserved, it can be converted into different forms. The electric energy generated by the battery will convert, in part, into heat…
If one can reduce the heat generated by the battery, the saved energy can be used to generate more power, thus more range…
There will also be heat generated by the friction of the motor parts… When the current is reduced, the energy consumption from the battery can be greatly reduced, and, in turn, so will the heat generated by the motor…
This energy saving is in the form of kinetic energy, which supplies the motor. That is to say, by reducing the energy consumption and improving the efficiency of the whole system, the skateboard can achieve more range

This formula may be familiar: P=UI
Power = Voltage *current

When the input power remains unchanged, as long as we increase the voltage, we can reduce the current, so as to reduce the heating of the whole system and improve the efficiency. Therefore, the 12S electronic system (voltage is 50.4V when fully charged) is far superior to the 10S electronic system (voltage is 42V when fully charged), which is commonly used in the market.
Learn more https://www.backfireboards.com/ranger-x2


Night Lights Backfire Cannon: https://bit.ly/33cUX50
Backfire 风林火山T-shirt: https://bit.ly/2OG1rGy


Where is board ship from?
Boards in the EU ship from depo in Hamburg, Germany but sales support and customer service is in Windermere in the UK. Boards in the USA ship from our LA office and they also deal with service and support. Our main manufacturing and development office is in the Shenzhen region of China.

How do I pair the remote with the board?
Check this link: https://youtu.be/pzyxVNpRsm8

Can Backfire be used like a normal skateboard when it’s out of power?
Yes, our boards are totally push friendly and will ride like a traditional skateboard when not on the throttle or when there is no battery.

Is my Backfire board waterproof?
The waterproof level of Backfire boards is IP55.
Riding over small puddles will not damage the board, nor will riding in light rain, however never submerge the board in the water and stop riding if the conditions lead to standing water on roads or track.
When you have finished riding in wet conditions it’s important to dry the board off with a rag and then spin the wheels using the motor and remote for two minutes to remove any access water. If the board did go through deeper standing water it may be a good idea to remove the outer case and gentle towel dry any visible water and then leave the board in a warm dry place.
Never leave a wet board upside down in the damp or this can cause the water to bypass the seal and ingress into the electronics. Your remote should also be kept dry and warm after use in the rain.

More questions please check here

Go to Source